• <var id="lvoaz"></var>
      1. <output id="lvoaz"></output>
          ovs-pki(8)                    Open vSwitch Manual                   ovs-pki(8)
          
          
          
          NAME
                 ovs-pki - OpenFlow public key infrastructure management utility
          
          
          SYNOPSIS
                 Each command takes the form:
          
                 ovs-pki [options] command [args]
          
                 The implemented commands and their arguments are:
                 ovs-pki init
                 ovs-pki req name
                 ovs-pki sign name [type]
                 ovs-pki req+sign name [type]
                 ovs-pki verify name [type]
                 ovs-pki fingerprint file
                 ovs-pki self-sign name
          
                 Each  type above is a certificate type, either switch (default) or con
                 troller.
          
                 The available options are:
                 [-k type | --key=type]
                 [-B nbits | --bits=nbits]
                 [-D file | --dsaparam=file]
                 [-b | --batch]
                 [-f | --force]
                 [-d dir | --dir=dir]
                 [-l file | --log=file]
                 [-h | --help]
          
                 Some options do not apply to every command.
          
          
          DESCRIPTION
                 The ovs-pki program sets up and manages a public key infrastructure for
                 use with OpenFlow.  It is intended to be a simple interface for organi‐
                 zations that do not have  an  established  public  key  infrastructure.
                 Other PKI tools can substitute for or supplement the use of ovs-pki.
          
                 ovs-pki uses openssl(1) for certificate management and key generation.
          
          
          OFFLINE COMMANDS
                 The following ovs-pki commands support manual PKI administration:
          
          
                 init   Initializes  a  new PKI (by default in directory //var/lib/open
                        vswitch/pki) and populates it with a pair of certificate author‐
                        ities for controllers and switches.
          
                        This  command  should  ideally be run on a high-security machine
                        separate from any OpenFlow controller or switch, called  the  CA
                        machine.      The    files    pki/controllerca/cacert.pem    and
                        pki/switchca/cacert.pem that it produces will need to be  copied
                        over  to  the  OpenFlow  switches and controllers, respectively.
                        Their contents may safely be made public.
          
                        By default, ovs-pki generates 2048-bit  RSA  keys.   The  -B  or
                        --bits  option  (see  below)  may  be  used  to override the key
                        length.  The -k dsa or --key=dsa option may be used to  use  DSA
                        in place of RSA.  If DSA is selected, the dsaparam.pem file gen‐
                        erated in the new PKI hierarchy must be copied to any machine on
                        which  the  req  command (see below) will be executed.  Its con‐
                        tents may safely be made public.
          
                        Other files generated by init may remain on the CA machine.  The
                        files  pki/controllerca/private/cakey.pem  and pki/switchca/pri
                        vate/cakey.pem have particularly sensitive contents that  should
                        not be exposed.
          
          
                 req name
                        Generates  a  new  private key named name-privkey.pem and corre‐
                        sponding certificate request named  name-req.pem.   The  private
                        key can be intended for use by a switch or a controller.
          
                        This  command  should ideally be run on the switch or controller
                        that will use the private key  to  identify  itself.   The  file
                        name-req.pem  must  be copied to the CA machine for signing with
                        the sign command (below).
          
                        This command will output a fingerprint to stdout  as  its  final
                        step.   Write down the fingerprint and take it to the CA machine
                        before continuing with the sign step.
          
                        When RSA keys are in use (as is the default),  req,  unlike  the
                        rest  of ovs-pki's commands, does not need access to a PKI hier‐
                        archy created by ovs-pki init.  The -B  or  --bits  option  (see
                        below)  may  be used to specify the number of bits in the gener‐
                        ated RSA key.
          
                        When DSA keys are used (as specified with --key=dsa), req  needs
                        access to the dsaparam.pem file created as part of the PKI hier‐
                        archy (but not to  other  files  in  that  tree).   By  default,
                        ovs-pki    looks    for    this    file    in    //var/lib/open
                        vswitch/pki/dsaparam.pem, but the -D or --dsaparam  option  (see
                        below) may be used to specify an alternate location.
          
                        name-privkey.pem  has  sensitive  contents  that  should  not be
                        exposed.  name-req.pem may be safely made public.
          
          
                 sign name [type]
                        Signs the certificate request named name-req.pem that  was  pro‐
                        duced  in  the  previous  step,  producing  a  certificate named
                        name-cert.pem.  type, either  switch  (default)  or  controller,
                        indicates the use for which the key is being certified.
          
                        This command must be run on the CA machine.
          
                        The command will output a fingerprint to stdout and request that
                        you verify that it is the same fingerprint  output  by  the  req
                        command.  This ensures that the request being signed is the same
                        one produced by req.  (The -b or --batch option  suppresses  the
                        verification step.)
          
                        The file name-cert.pem will need to be copied back to the switch
                        or controller for which it is intended.  Its contents may safely
                        be made public.
          
          
                 req+sign name [type]
                        Combines  the  req  and  sign  commands into a single step, out‐
                        putting all the files produced by  each.   The  name-privkey.pem
                        and name-cert.pem files must be copied securely to the switch or
                        controller.  name-privkey.pem has sensitive  contents  and  must
                        not be exposed in transit.  Afterward, it should be deleted from
                        the CA machine.
          
                        This combined method is, theoretically,  less  secure  than  the
                        individual steps performed separately on two different machines,
                        because there is additional potential for exposure of  the  pri‐
                        vate key.  However, it is also more convenient.
          
          
                 verify name [type]
                        Verifies that name-cert.pem is a valid certificate for the given
                        type of use, either switch (default) or controller.  If the cer‐
                        tificate   is   valid  for  this  use,  it  prints  the  message
                        ``name-cert.pem: OK''; otherwise, it prints an error message.
          
          
                 fingerprint file
                        Prints the fingerprint for file.  If file is a certificate, then
                        this  is the SHA-1 digest of the DER encoded version of the cer‐
                        tificate; otherwise, it is the SHA-1 digest of the entire file.
          
          
                 self-sign name
                        Signs the certificate request named name-req.pem using the  pri‐
                        vate  key  name-privkey.pem, producing a self-signed certificate
                        named name-cert.pem.  The input files should have been  produced
                        with ovs-pki req.
          
                        Some controllers accept such self-signed certificates.
          
          
          OPTIONS
                 -k type
                 --key=type
                        For  the  init command, sets the public key algorithm to use for
                        the new PKI hierarchy.  For the req and req+sign commands,  sets
                        the  public  key  algorithm  to use for the key to be generated,
                        which must match the value specified on init.  With  other  com‐
                        mands, the value has no effect.
          
                        The type may be rsa (the default) or dsa.
          
          
                 -B nbits
                 --bits=nbits
                        Sets  the  number  of bits in the key to be generated.  When RSA
                        keys are in use, this option affects only  the  init,  req,  and
                        req+sign commands, and the same value should be given each time.
                        With DSA keys are in use, this option affects only the init com‐
                        mand.
          
                        The value must be at least 1024.  The default is 2048.
          
          
                 -D file
                 --dsaparam=file
                        Specifies  an  alternate  location  for  the  dsaparam.pem  file
                        required by the req and req+sign commands.  This option  affects
                        only these commands, and only when DSA keys are used.
          
                        The default is dsaparam.pem under the PKI hierarchy.
          
          
                 -b
                 --batch
                        Suppresses the interactive verification of fingerprints that the
                        sign command by default requires.
          
          
                 -d dir
                 --dir=dir
                        Specifies the location of the PKI hierarchy to be used  or  cre‐
                        ated  by  the command (default: //var/lib/openvswitch/pki).  All
                        commands, except req, need access to a PKI hierarchy.
          
          
                 -f
                 --force
                        By default, ovs-pki will not overwrite existing files or  direc‐
                        tories.  This option overrides this behavior.
          
          
                 -l file
                 --log=file
                        Sets   the   log   file   to   file.   Default:  //var/log/open
                        vswitch/ovs-pki.log.
          
          
                 -h
                 --help Prints a help usage message and exits.
          
          
          
          Open vSwitch                        2.5.90                          ovs-pki(8)
          
          现金李逵劈鱼